Tying ties is not easy for the beginner. Many knots exist, some of which can be quite complicated. One of the best known is the Windsor knot in single and double design, which should not be missing in the repertoire of tie wearers. Whether you want to tie a double or single Windsor knot, practice and a good guide are necessary to master it.

Bind Windsor Knots
In search of a suitable tie knot, many people decide to use a Windsor knot. If you want to tie a Windsor knot, you have two options: single and double Windsor knots. These describe how often the tie is turned over and change the difficulty level accordingly.

For example, the Hanoverian knot and the Merovingian knot are some of the more difficult knots you can choose because of their numerous envelopes. For this reason, it is important to know how to bind the different variants of a Windsor knot, as this will give you an effective basis for many other tie knots that you can try out.

The single and double Windsor differ slightly in their difficulty. Already the name of the two knots indicates which of them is easier for a beginner to master. Since the simple knot requires one fold less and the general guidance of the tie is easy to manage, you should first use the simple variant as a tie newcomer.

The advantage at both knots: You do not need a longer tie to tie it. This means that you can use your chosen length without any problems and do not have to buy a new tie. For both knots, the tie should end just above the waistband.

Simple Windsor knot
Tie a simple knot: DIY Tutorial

In itself, the name “simple node” is wrong and actually describes another classical node: Four-in-Hand. The correct name of the knot would be “half Windsor knot”, but it is also known as “half English” or “Turkish” knot. The simple knot is good for shirts with the following collars due to its shape, which is rather voluminous.

Collar corners that are close together
button down
The cone-shaped style and good symmetry makes it easy to combine with appropriate colours and patterns and is also good for beginners in this case. It is a bit fuller than the single knot, but not as much as the double Windsor knot. This sometimes makes it look a bit more casual. If you want to tie the single knot, follow these instructions.

1. tying half the Windsor knot starts with flipping it over. Take the tie in your hand and turn it so that the correct side is facing outwards. Now put the tie on and make sure that the shirt collar is over the tie, not the tie over the collar.

This way you don’t shorten the tie unnecessarily and can tie it without any problems. The visible part of the tie at the end must be on your right side when tying the Windsor knot. Smooth out the tie and let it hang at the right length.

2.Now you can start with the simple node. Now take the wide part of the tie in your hand and knock it diagonally to the left around the thin part. You should now have the wide end of the tie on the left side, only the underside points outwards.

Now tap the broad side from the outside through the middle to slowly bring the knot into shape. After turning the knot over, the leading part must point out to the left.

3.Now check whether the knot is still seated or has come loose. Work with sure hand movements and tighten the tie a little after each step to avoid unintentionally loosening the knot.

4. Continue with the knot by simply bringing the leading part to the right side at an angle. This must be guided in such a way that you can already see the simple knot. Where the knot sits, a piece of cloth should be visible to cover it. After this step, the leading part should now point diagonally to the bottom right with the outside and with the seams to your body.

5.Five. You did it! Now all you have to do is complete the tie knot by leading it through the middle of the knot from behind.

Pull it carefully through the middle and adjust half of the Windsor knot so that it does not sit crooked or open again when you look at it. You can now adjust the length a little more finely and if your tie has a flap, thread the back part into it. This will give you even more support.

Of the numerous tie knots, half the Windsor is one of the easier ones and can be perfected quickly with a little practice. Make sure to fix the tie sufficiently so that the knot doesn’t just undo.

Double Windsor knot
Tie double knot: DIY Tutorial

If you are interested in the double knot, you will need some practice, as it is more difficult to master even though it is based on half the Windsor. As with half a Windsor knot, this is actually called a “double Windsor knot”, more rarely an “English knot”. This naming indicates that two envelopes are used through the middle before the final impact. The double knots are suitable for shirts with widely spaced collars.

Kent collar
shark collar
This closes the gap sufficiently and directs the view to the tie and not to the upper body. Once you are ready to tie the double knot, proceed as follows.

The initial position is the same as when you tie half the Windsor knot. The only difference is that the wide side is on the right and you have to leave the wide side a little longer, otherwise it will be too short at the end.

Move the wide side to the left over the narrow side so that the wide side to the left points downwards. The wide end is now led to the body and then upwards under the narrow end.

Now you can simply bring the wide end over the middle back to the right side. This should now be on the left and point diagonally downwards.

Again put the wide part on the left side, but this time under, not over the narrow part. Then the underside with the seams should be visible.

Now lead the wide part outside over the middle to the left side. Now the end should be aligned diagonally to the left again.

Finally, tap the wide end again to the left directly above the knot.

Lead the tie along the body to the middle and insert the wide end through the fixing opening.

Now the following result appears. Your double Windsor node should now look like the one on the following picture.

Align the tie length and fix the knot. Again, pass the narrow end through an existing loop.

Tip: The Windsor knot was named after Edward VIII, who after his abdication in 1936 as King of the United Kingdom of Great Britain and Northern Ireland and Indian Emperor was declared Duke of Windsor in 1937 and wore the characteristic tie knot throughout his term of office.

Until 1960, he was often credited with inventing the Windsor knot, which the British man denied in his self-authored book “A Family Album” on the grounds that the tie fabric used was only thicker.


Please enter your comment!
Please enter your name here